A Step-by-step Tutorial on Donning and Doffing Electrical Gloves Correctly

by

Electrical gloves are essential safety equipment for workers handling high-voltage equipment. Proper donning and doffing techniques ensure safety and maintain the integrity of the gloves. This tutorial provides step-by-step instructions to help workers don and doff electrical gloves correctly.

Preparing to Don Electrical Gloves

Before putting on electrical gloves, ensure they are clean, dry, and free of any damage. Inspect the gloves thoroughly for tears, holes, or signs of wear. If any defects are found, replace the gloves immediately. Gather all necessary personal protective equipment (PPE) and ensure your hands are clean and dry.

Inspection of Gloves

  • Visually examine the exterior for cuts, tears, or punctures.
  • Check the cuff area for signs of wear or damage.
  • Perform a squeeze test to ensure the glove is not compromised.
  • Verify the gloves’ expiration date if applicable.

Donning Electrical Gloves

Follow these steps to don electrical gloves safely:

  • Put on cotton inner gloves if required for added comfort and protection.
  • Hold the glove at the opening and insert your hand carefully, ensuring the fingers are fully inserted.
  • Pull the glove over your hand, smoothing out any wrinkles to prevent damage during use.
  • Repeat the process for the other hand, ensuring both gloves fit snugly.

Doffing Electrical Gloves

Proper removal of gloves prevents contamination and damage. Follow these steps:

  • Pinch the outside of the glove near the cuff.
  • Pull the glove away from your hand, turning it inside out as you remove it.
  • Hold the removed glove in your gloved hand.
  • Slide your fingers under the cuff of the remaining glove, being careful not to touch the outside.
  • Remove the second glove by turning it inside out over the first glove.
  • Dispose of or store the gloves according to safety protocols.

Final Safety Checks

After removing the gloves, inspect them again for any damage or contamination. Clean and store the gloves properly for future use. Always follow your organization’s safety procedures and manufacturer guidelines to ensure maximum protection.